Project Category: <span>Componenti</span>

Where air re-entry systems are present, heat recovery units can be installed that allow for the consumption of heating and cooling to be reduced.  

In case of explosive dust, if it becomes necessary to protect a filter against explosions, it may be necessary to use suppression and/or chemical partitioning (for example, for toxic/harmful dust that cannot be dispersed in the environment or when the filter is inside of the production department). The photos show a few examples of our...

In the event of explosive dust, if it becomes necessary to protect a filter with the vent membranes, a certified partitioning valve must be installed. This valve prevents the explosion to reach the department through the extraction duct. In these cases, we choose the certified component with the correct features from amongst our suppliers. The...

In the case of explosive dust, if it becomes necessary to protect a filter by means of explosion venting, we install breaking membranes certified by different vendors.

Butterfly valves manufactured by Astra. Made in painted carbon steel or stainless steel. Flare or welded flanges. With standard or oil seal. Driven by piston or actuator. Diameters from 400 mm to 1,250 mm

For our systems, we use rotary valves from different vendors according to the project specifications. Pictured is a rotary valve suitable for a 20/22 ATEX area with certification for flame passing in the event of explosion up to 10 bars. This rotary valve can be installed under a protected filter against explosion that, for example,...

We are able to provide suitable components to build systems within areas classified under the ATEX directive. The photo shows a fan for an ATEX-classified area with motor equipped with servo-ventilation for operation with an inverter at low rpm